- Brand: Temank
- Product Model: POW-VM5K-III
- Technology: MPPT
- Type: Inverter/Charger
- Pure sine wave inverter
- Configurable input voltage ranges for home appliances and personal computers via LCD control panel
- Configurable battery charging current based on applications via LCD control panel
- Configurable AC/Solar Charger priority via LCD control panel
- Compatible to utility mains or generator power
- Auto restart while AC is recovering
- Overload / Over temperature / short circuit protection
- Smart battery charger design for optimized battery performance
- Cold start function
- Removable LCD control module
- Built-in Bluetooth for mobile monitoring (Requires App), OTG USB function, dusk filters
- Multiple communication ports for BMS (RS485, CAN-BUS, RS232)
- Configurable AC/PV Output usage timer and prioritization
Mode Specifications
|
INVERTER MODEL |
1.5KW |
3KW |
5KW |
|
Input Voltage Waveform |
Sinusoidal (utility or generator) |
||
|
Nominal Input Voltage |
230Vac |
||
|
Low Loss Voltage |
170Vac±7V (UPS); |
||
|
Low Loss Return Voltage |
180Vac±7V (UPS); |
||
|
High Loss Voltage |
280Vac±7V |
||
|
High Loss Return Voltage |
270Vac±7V |
||
|
Max AC Input Voltage |
300Vac |
||
|
Nominal Input Frequency |
50Hz/60Hz (Auto detection) |
||
|
Low Loss Frequency |
40±1Hz |
||
|
Low Loss Return Frequency |
42±1Hz |
||
|
High Loss Frequency |
65±1Hz |
||
|
High Loss Return Frequency |
63±1Hz |
||
|
Output Short Circuit Protection |
Circuit Breaker |
||
|
Efficiency (Line Mode) |
>95% ( Rated R load, battery full charged ) |
||
|
Transfer Time |
10ms typical (UPS); |
||
|
Output power derating: |
|
||
Inverter Mode Specifications
|
INVERTER MODEL |
1.5KW |
3KW |
5KW |
|
Rated Output Power |
1.5KVA/1.5KW |
3KVA/3KW |
5KVA/5KW |
|
Output Voltage Waveform |
Pure Sine Wave |
||
|
Output Voltage Regulation |
230Vac±5% |
||
|
Output Frequency |
50Hz |
||
|
Peak Efficiency |
93% |
||
|
Overload Protection |
5s@≥130% load; 10s@105%~130% load |
||
|
Surge Capacity |
2* rated power for 5 seconds |
||
|
Nominal DC Input Voltage |
24Vdc |
48Vdc |
|
|
Cold Start Voltage |
23.0Vdc |
46.0Vdc |
|
|
Low DC Warning Voltage @ load ≥ 50% |
23.0Vdc 22.0Vdc |
46.0Vdc 44.0Vdc |
|
|
Low DC Warning Return Voltage @ load ≥ 50% |
23.5Vdc 23.0Vdc |
47.0Vdc 46.0Vdc |
|
|
Low DC Cut-off Voltage @ load ≥ 50% |
21.5Vdc 21.0Vdc |
43.0Vdc 42.0Vdc |
|
|
High DC Recovery Voltage |
32Vdc |
62Vdc |
|
|
High DC Cut-off Voltage |
33Vdc |
63Vdc |
|
|
No Load Power Consumption |
<35W |
<50W |
|
General Specifications
|
INVERTER MODEL |
1.5KW |
3KW |
5KW |
|
Operating Temperature Range |
-10°C to 50°C |
||
|
Storage temperature |
-15°C~ 60°C |
||
|
Humidity |
5% to 95% Relative Humidity (Non-condensing) |
||
|
Dimension (D*W*H), mm |
100 x 280 x 390 |
115 x 300 x 400 |
|
|
Net Weight, kg |
8.5 |
9 |
10 |
Basic System Architecture
The following illustration shows basic application for this unit. It also required the following devices to have a complete running system:
- Generator or Utility mains
- PV modules
Consult with your system integrator for other possible system architectures depending on your requirements.
This inverter can power various appliances in home or office environment, including motor-type appliances such as tube light, fan, refrigerator and air conditioners.
Product Overview
- LCD display
- Status indicator
- Charging indicator
- Fault indicator
- Function buttons
- Power on/off switch
- AC input
- AC output
- PV input
- Battery input
- Circuit breaker
- Remote LCD panel communication port
- Dry contact
- USB communication port
- BMS communication port: CAN and RS232 or RS485
- RS-232 communication port
- Output source indicators (refer to OPERATION/Operation and Display Panel section for details) and USB function setting reminder (refer to OPERATION/Function Setting for the details)
There is detail information about Temank 1.5KW 3KW 5KW VM-5K Solar Inverter/Charger With LCD Panel as below:
Temank 1.5KW 3KW 5KW VM-5K Solar Inverter/Charger With LCD Panel Manual