Temank 40A 110V/120V MPPT All-In-One Solar Charge Controller HF4835U80 With LCD Screen For refrigerators, lamps, TVs, fans

Regular price: ~~$716.99$716.99~~
Sale price: $680.99$680.99
Unit price: per

Warehouse

Quantity must be 1 or more

Brand: Temank
Product Model: HF4835U80
Technology Model: MPPT
Dispaly: LCD Display
Full digital voltage and current double closed loop control, advanced SPWM technology, output of pure sine wave.
Two output modes: mains bypass and inverter output; uninterrupted power supply.
Available in 4 charging modes: Only Solar, Mains Priority, Solar Priority and Mains & Solar hybrid charging.
Advanced MPPT technology with an efficiency of 99.9%.
Designed with a LCD screen and 3 LED indicators for dynamic display of system data and operating status.
ON/OFF rocker switch for AC output control.
Power saving mode available to reduce no-load loss.
Intelligent variable speed fan to efficiently dissipate heat and extend system life.
Lithium battery activation design, allowing access of lead-acid battery and lithium battery.
10.360 ° all-round protection with a number of protection functions.
11.Complete protections, including short circuit protection, over voltage and under voltage protection, overload protection, reverse protection, etc.

Parameter Table:

Models	HF4830S60		HF4840S60		HF4850S80	HF4825U60	HF4830U60	HF4835U80
*Mains mode*
Rated input voltage	220/230Vac					110/120Vac
Input voltage range	(170Vac~280Vac) ±2% (90Vac-280Vac) ±2%					(90Vac~140Vac) ±2%
Frequency	50Hz/ 60Hz (Auto detection)
Frequency Range	47±0.3Hz ~ 55±0.3Hz (50Hz); 57±0.3Hz ~ 65±0.3Hz (60Hz);

Overload/short circuit protection	Circuit breaker
Efficiency	>95%
Conversion time (bypass and inverter)	10ms (typical)
AC reverse protection	Available
Maximum bypass overload current	40A
*Inverter mode*
Output voltage waveform	Pure sine wave
Rated output power (VA)	3000	4000		5000		2500	3000	3500
Rated output power (W)	3000	4000		5000		2500	3000	3500
Power factor	1
Rated output voltage (Vac)	230Vac					120Vac
Output voltage error	±5%
Output frequency range (Hz)	50Hz ± 0.3Hz 60Hz ± 0.3Hz
Efficiency	>90%
Overload protection	(102% < load <125%) ±10%: report error and turn off the output after 5 minutes; (125% < load < 150%) ± 10%: report error and turn off the output after 10 seconds; Load >150% ±10%: report error and turn off the output after 5 seconds;					(102% < load <110%) ±10%: report error and turn off the output after 5 minutes; (110% < load < 125%) ± 10%: report error and turn off the output after 10 seconds; (Load >150% ±10%): report error and turn off the output after 5 seconds;


Peak power	6000VA	8000VA		10000VA		5000VA	6000VA	7000VA
Loaded motor capability	2HP	3HP		4HP		1HP	1HP	2HP

Output short circuit protection	Circuit breaker
Bypass breaker specifications	40A
Rated battery input voltage	48V (Minimum starting voltage 44V)
Battery voltage range	Undervoltage alarm/shutdown voltage/overvoltage alarm /overvoltage recovery... settable on LCD screen)

Power saving mode	Load ≤25W
*Mains charging*
Battery type	Lead acid or lithium battery
Maximum charge current	60A					30A
Charge current error	± 5Adc
Charge voltage range	40 –58Vdc					40 –60Vdc
Short circuit protection	Circuit breaker and blown fuse
Circuit breaker specifications	40A
Overcharge protection	Alarm and turn off charging after 1 minute
*PV charging*
Maximum PV open circuit voltage	145Vdc
PV operating voltage range	60-145Vdc
MPPT voltage range	60-115Vdc
Battery voltage range	40-60Vdc
Maximum output power	3200W			4200W		3200W		4200W
PV charging current range (can be set)	0-60A			0-80A		0-60A		0-80A
Charging short circuit protection	Blown fuse
Wiring protection	Reverse polarity protection
*Certified specifications*
Certification	CE(EN62040-1)
EMC certification level	EN62040-2, C2
Operating temperature range	-15°C to 55°C
Storage temperature range	-25°C ~ 60°C
Humidity range	5% to 95% (Conformal coating protection)
Noise	≤60dB
Heat dissipation	Forced air cooling, variable speed of fan
Communication interface	USB/RS485(Bluetooth/WiFi/GPRS)/Dry node control
Size (LWD)	430mm338mm126mm
Weight (kg)	10

Basic system introduction

The figure below shows the system application scenario of this product. A complete system consists of the following parts:

PV module: Convert light energy into DC power, and charge the battery through the all-in-one solar charge inverter, or directly invert into AC power to drive the load.
Mains or generator: Connected at the AC input, to power the load while charging the battery. If the mains or generator is not connected, the system can also operate normally, and the load is powered by the battery and PV module.
Battery: Provided to ensure normal power supply to the system loads when solar energy is insufficient and the Mains is not connected.
Household load: Allow connection of various household and office loads, including refrigerators, lamps, TVs, fans and air conditioners.
All-in-one solar charge inverter: The energy conversion unit of the whole system. Specific system wiring method depends on the actual application scenario.

Temank 40A MPPT All-In-One Solar Charge Controller HF4830S60 With LCD Screen For power tools industrial equipment

Appearance

Temank 40A MPPT All-In-One Solar Charge Controller HF4830S60, LCD Screen For power tools

①	CAN communication port	⑨	PV1 port
②	USB communication port	⑩	AC input port
③	RS485 communication port	⑪	AC output port
④	Dry node port	⑫	ON/OFF rocker switch
⑤	Overload protector	⑬	Grounding screw hole
⑥	Cooling fan	⑭	Touch button
⑦	Battery port	⑮	Indicator
⑧	PV2 port	⑯	LCD screen

Recommended battery input wire diameter and switch selection

Models	Recommended battery wiring diameter	Rated battery discharge current	Maximum charge current	Recommended air switch or circuit breaker type
HF4830S60	20mm2/4AWG	85A	120A	2P—140A
HF4840S60	25mm2/3AWG	110A	120A	2P—160A
HF4850S80	30mm2/2AWG	125A	140A	2P—200A
HF4825U60	20mm2/4AWG	75A	90A	2P—120A
HF4830U60	20mm2/4AWG	85A	90A	2P—120A
HF4835U80	25mm2/3AWG	100A	140A	2P—160A

Recommended AC output wiring specifications and circuit breaker selection

Models	Recommended battery wiring diameter	Rated inverter AC output current	Maximum bypass output current	Recommended air switch or circuit breaker type
HF4830S60	10mm2/7AWG	13A	40A	2P—40A
HF4840S60	10mm2/7AWG	17.5A	40A	2P—40A
HF4850S80	10mm2/7AWG	22A	40A	2P—40A
HF4825U60	10mm2/7AWG	21A	40A	2P—40A
HF4830U60	10mm2/7AWG	25A	40A	2P—40A
HF4835U80	10mm2/7AWG	30A	40A	2P—40A

Note: The wiring diameter is for reference only. If the distance between the PV array and the all-in-one solar charge inverter or the distance between the all-in-one solar charge inverter and the battery is relatively long, using a thicker wire can reduce the voltage drop to improve system performance. Note: The above are only recommended wiring diameter and circuit breaker. Please select the appropriate wiring diameter and circuit breaker according to actual situations.

LCD screen operating instructions

Operation and display panel

The operation and display panel is as shown below, including 1 LCD screen, 3 indicators and 4 operation buttons.

Temank, MPPT, All-In-One, Solar Charge Controller, HF4830S60 ,LCD Screen For industrial equipment

Operation buttons introduction

Function buttons	Description
SET	Enter/Exit Settings menu
UP	Previous choice
DOWN	Next choice
ENT	Confirm/Enter Options under the settings menu,

Indicators introduction

Indicators	Colors	Description
AC/INV	Yellow	Steady on: Mains output
AC/INV	Yellow	Flash: Inverter output
CHARGE	Green	Flash: Battery charging
CHARGE	Green	Steady on: Charging completed
FAULT	Red	Steady on: Fault state

LCD screen introduction

Temank 40A MPPT All-In-One Solar Charge Controller HF4830S60 With LCD Screen For power tools industrial equipment

There is detail information about Temank 40A 110V/120V MPPT All-In-One Solar Charge Controller HF4835U80 With LCD Screen For refrigerators, lamps, TVs, fans
as below:

Temank 40A 110V/120V MPPT All-In-One Solar Charge Controller HF4835U80 With LCD Screen For refrigerators, lamps, TVs, fans Manual Download