- Brand: Temank
- Product Model: T30
- Charge Model: PWM/MPPT
- LCD screen display
- Easy operation interface
- MPPT+ PWM charging mode
- Parameter user can reset Overload
- A key to restore the factory settings
- A key to open and close the load
- USB 5V charging (for 500mA) for mobile phone(Only for M30)
- Dual Timer function
Introduction:This is a three-time controller into the evening working time,an interval of rest of pause time,Dawn working time(morning light function), the user can according to their needs,set a different time. This is a compatible MPPT charge controller PWM intelligent / efficient / energy saving, he not only has efficient MPPT controller charging function to automatically track the maximum power point, 10% -30% higher than the ordinary controller charging efficiency, also has standby energy saving, more than 30% energy than ordinary controller, the standby power consumption of only 10mA-15mA.
Protect function
- Battery reverse discharge protection
- Battery reverse polarity protection
- Battery under voltage protection
- Short-circuit protection
- Automatic temperature compensation function
Data Sheet
|
Parameters / Model |
T10 |
T20 |
T30 |
T40 |
|
Maximum power current |
12A |
20A |
30A |
40A |
|
Installation Lin（mm2） |
4mm2 |
8mm2 |
10mm2 |
12mm2 |
|
Installation Line(AWG) |
10(AWG) |
8(AWG) |
7(AWG) |
6(AWG) |
|
Weight |
280g |
300g |
475g |
480 |
|
Dimensions |
143×89×46（mm） |
187*97*61（mm） |
||
|
System load loss |
≤13mA |
|||
|
Loop Buck |
≤100mV |
|||
Specification
|
Battery float voltage |
13.8V（12V system）/27.6V（24V system） |
|
Battery （under voltage) protection |
10.6V（12V system）/21.2V（24V system） |
|
Battery (under voltage) recovery voltage |
12.6V（12V system）/25.2V（24V system） |
|
Charge mode |
MPPT+PWM MODE |
|
Operating Temperature |
-10℃~60℃ |
|
Storage Temperature |
-30℃~70℃ |
|
Humidity requirements |
≤90％, No condensation |
|
Temperature compensation |
-4mV/Cell/℃ |
|
Temperature Probe (built components) |
NTC 100K thermistats |
|
Maximum open circuit voltage of the solar panel |
18V-24V（12V system）36V-48V（24V system) |
|
Solar panels maximum open circuit voltage (V) |
≤48V |
(Cases) 12V system standard configuration
|
The peak voltage of the solar cell panel |
18V-25V |
18V-25V |
18V-25V |
18V-25V |
|
Peak power of solar cell panel |
50W-130W |
100W-260W |
200W-380W |
≤500W |
|
Model |
T10 |
T20 |
T30 |
T40 |
|
Battery standard voltage |
12V |
12V |
12V |
12V |
|
Battery capacity |
≥100AH |
≥200AH |
≥300AH |
≥400AH |
|
Installation Lin（mm2） |
4mm2 |
8mm2 |
10mm2 |
12mm2 |
|
Installation Line(AWG) |
10(AWG) |
8(AWG) |
7(AWG) |
6(AWG) |
There is detail information about Temank PWM MPPT Solar Charge Controller T30 12V AWG7 as below:
Temank PWM MPPT Solar Charge Controller T30 12V 30A AWG 7 download