Temank PWM 5A 12V Solar Controller Features:
- Brand: Temank
- Technology: PWM
- Build-in industrial micro controller.
- LED display,auto memory function,IP57 protection.
- Fully 4-stage PWM charge management.
- Build-in short-circuit protection,open-circuit protection, reverse protection,over-load protection.
- Dual mosfet Reverse current protection, low heat production.
SAFETY INSTRUCTIONS
- Make sure your battery has enough voltage for the controller to recognize the battery type before first installation.
- The battery cable should be as short as possible to minimize loss.
- The regulator is only suitable for lead acid batteries: OPEN,AGM, GEL it is not suited for nickel metal hydride, lithium ions or other batteries.
- The charge regulator is only suitable for regulating solar modules.
Never connect another charging source to the charge regulator.
TECHNICAL PARAMETER
| MODEL | 5A-12V | 5A-12V-L | 5A-12V-ST 8H |
| Batt voltage | 6V/12V auto adapt | ||
| Charge current | 5A | ||
| Discharge current | 5A | ||
| Max Solar input | 22V | ||
| Charge drop | <0.2V | ||
| Discharge drop | <0.25V | ||
| Equalization | 14.8V | ||
| Bulk | 14.5V | ||
| Acceptance | 14.2V PWM | ||
| Float | 13.8V | ||
| Charge reconnect | 13.0V | ||
| Discharge stop | 11.2V | ||
| Discharge reconnect | 12.6V | ||
| Self-consume | <10mA | ||
| Voltage of open light | Solar panel 8V（delay 10s） | ||
| Voltage of close light | Solar panel 8V（delay 60s） | ||
| Temperature compensation |
N/C | ||
| Operating temperature |
-35~+60 ℃ | ||
| Size/Weight | 60x25x18mm/50g | ||
There is detail information about Temank PWM 5A 12V Solar Controller as below: