EPEVER 30A Negative Flush Mount Solar Charge Controller
EPEVER 30A Negative Flush Mount Solar Charge Controller
EPEVER 30A Negative Flush Mount Solar Charge Controller

EPEVER 30A Negative Flush Mount Solar Charge Controller

Regular price
$69.99
Sale price
$43.99
Unit price
per 

  • GoMate is a flush mounted 30A negative-ground solar charge controller, equipped with Pulse Width Modulated (PWM) charging mode. It’s compatible with 12/24 Volt photovoltaic systems and can be applied to any off-grid solar system such as Recreation vehicles (RVs), mobile service vehicles, solar boats, etc.
  • Negative-ground charge controller. Protection against: overcharging, overload, short-circuit, and reverse polarity. RS485 communication port with Modbus protocol, and short circuit protection for 5V/200mA power supply.
  • This solar charge regulator compatible with Sealed, Gel, and Flooded batteries. 3-Stage intelligent PWM charging: Bulk, Boost / Equalize and Float. prevents batteries from over-charging and over-discharging.
  • 30A solar controller Real-time operating information and data are displayed on LCD. Control parameters are fully programmable with a variety of methods including PC software, Mobile app, Bluetooth module, and Wi-Fi module as well.
  • Compensates for temperature, Rated charging current at working temperature without de-rating. Automatic cycle interface: PV voltage, PV current, PV power, Battery voltage and Battery temperature
2
2

Features:

 

  • High quality and low failure rate components (ST/IR) to ensure the product lifetime
  • Real-time energy statistics feature
  • Battery temperature compensation feature
  • Digital LCD monitor for informative display of operational parameters and fault messages
  • Voltage drop and temperature compensation sampling interface design
  • RS485 communication port with Modbus protocol, and short circuit protection for 5V/200mA power supply
  • Multiple communication peripherals
  • Rated charging current at working temperature without de-rating
  • Extensive electronic protections

 

Warm tips:

Step: Connect the system in the order of 1.battery-->2. load-->3.PV array, and disconnect the system in the reverse order 3. 2. 1.

 

  • Battery must be connected first !!!
  • Never connect the soalr panel array to the controller Without/Before a Battery.
  • DO NOT connect any inverter/ wind/Alternator or Charger into the charge controller!
  • If the remote temperature sensor is not connected to the controller, the default setting for battery charging or discharging temperature is 25 °C without temperature compensation.