Tracer series MPPT Controller is suitable for various off-grid solar applications.
It protects the battery from being over-charged by the solar modules and over-discharged by the loads.
New added function: Automatic limit for maximum PV input powe. Should the PV input exceed the rating, the controller will simply limit the the throughput to the rated level. Specification:
- Multiple load control modes: manual control, lighting ON / OFF, light On+Timer
- Advanced Maximum Power Point Tracking (MPPT) technology, with efficiency no less than 99.5%
- Wide MPPT operating voltage range
- LCD display design, dynamically displaying tool's operating data and working condition
- Available for PC monitoring and external display realizing real-time data checking and parameters setting
- Charging Power and Current Limitation Function
- User programmable for battery types, load control etc.
- Accurately recognizing and tracking of multiple power point
- PV short circuit / PV reverse polarity /Battery over voltage
- Battery over discharge / Battery reverse polarity / Load overload protection
Added Features（than Tracer A）:
- Common Negative Ground
- Blacklight LCD Display
- Support lithium Battery
- More Safety Protection
Package List:
1 x Tracer 1210AN Solar Charge Controller
1 x Use Manual
Tracer 1210AN MPPT Charge Controller
- 12V / 24V DC Auto
- Rated charge current: 10A
- Max Input Power:12V @ 130W | 24V @ 260W
- Max.PV open circuit voltage:100VDC (92V at 25℃ temperature)
- Battery type selection: lead-acid (Gel, Sealed, Flooded) and Lithium
- Battery voltage range: 9V~32V C
- Common-Negatived Ground Controller
- Charging Power and Current Limitation Function
- User programmable for battery types, load control etc.
Warm tips：
Step: Connect the system in the order of 1.battery-->2. load-->3.PV array,
Disconnect the system in the reverse order 3. 2. 1.
- Battery must be connected first !!!
- Never connect the soalr panel array to the controller Without/Before a Battery.
- DO NOT connect any inverter/ wind/Alternator or Charger into the charge controller!
- If the remote temperature sensor is not connected to the controller, the default setting for battery charging or discharging temperature is 25 °C without temperature compensation.
- The wire size is only for reference. If there is a long distance between the PV array and the controller or between the controller and the battery, larger wires can be used to reduce the voltage drop and improve performance.
How to program for Lithium Battery？
1. Via PC (Accessories needed：RS485), software download website: EPever official website or look for in the manual
2. Via phone APP (Accessories needed：Ebox-Wifi or Ebox-Blue)
The old software download from: EPever official website, iOS system: search Epever on APP store (but the old software can not chose the Lithium battery type, fit for lead-acid battery)
The lastest software only support Android phone. download URL ask seller.
Amazon UPC:
- If you want buy MT50, please search: B01NCF5VWZ, RS485: B00YCSLQTA, TS-R: B00YCSLU96
- MC4 solar connectors" B07GGTLGHL " or" B07H4JSJPW "
- Circuit Breaker (60A-250A): B06WLHDWSC, B06WD1BLGQ