Temank 40A 110V/120V MPPT All-In-One Solar Charge Controller HF4835U80 With LCD Screen For  refrigerators, lamps, TVs, fans
Temank 40A 110V/120V MPPT All-In-One Solar Charge Controller HF4835U80 With LCD Screen For  refrigerators, lamps, TVs, fans
Temank 40A 110V/120V MPPT All-In-One Solar Charge Controller HF4835U80 With LCD Screen For  refrigerators, lamps, TVs, fans
Temank 40A 110V/120V MPPT All-In-One Solar Charge Controller HF4835U80 With LCD Screen For  refrigerators, lamps, TVs, fans

Temank 40A 110V/120V MPPT All-In-One Solar Charge Controller HF4835U80 With LCD Screen For refrigerators, lamps, TVs, fans

Regular price
$716.99
Sale price
$680.99
Unit price
per 

  • Brand: Temank
  • Product Model: HF4835U80
  • Technology Model: MPPT
  • Dispaly: LCD Display
  • Full digital voltage and current double closed loop control, advanced SPWM technology, output of pure sine wave.
  • Two output modes: mains bypass and inverter output; uninterrupted power supply.
  • Available in 4 charging modes: Only Solar, Mains Priority, Solar Priority and Mains & Solar hybrid charging.
  • Advanced MPPT technology with an efficiency of 99.9%.
  • Designed with a LCD screen and 3 LED indicators for dynamic display of system data and operating status.
  • ON/OFF rocker switch for AC output control.
  • Power saving mode available to reduce no-load loss.
  • Intelligent variable speed fan to efficiently dissipate heat and extend system life.
  • Lithium battery activation design, allowing access of lead-acid battery and lithium battery.
  • 10.360 ° all-round protection with a number of protection functions.
  • 11.Complete protections, including short circuit protection, over voltage and under voltage protection, overload protection, reverse protection, etc.

Parameter Table:

 

Models

HF4830S60

HF4840S60

HF4850S80

HF4825U60

HF4830U60

HF4835U80

Mains mode

Rated input voltage

220/230Vac

110/120Vac

Input voltage range

(170Vac~280Vac) ±2%
(90Vac-280Vac) ±2%

(90Vac~140Vac) ±2%

Frequency

50Hz/ 60Hz (Auto detection)

Frequency Range

47±0.3Hz ~ 55±0.3Hz (50Hz);
57±0.3Hz ~ 65±0.3Hz (60Hz);

Overload/short circuit protection

Circuit breaker

Efficiency

>95%

Conversion time (bypass and inverter)

10ms (typical)

AC reverse protection

Available

Maximum bypass overload current

40A

Inverter mode

Output voltage waveform

Pure sine wave

Rated output power (VA)

3000

4000

5000

2500

3000

3500

Rated output power (W)

3000

4000

5000

2500

3000

3500

Power factor

1

Rated output voltage (Vac)

230Vac

120Vac

Output voltage error

±5%

Output frequency range (Hz)

50Hz ± 0.3Hz
60Hz ± 0.3Hz

Efficiency

>90%

Overload protection

 

(102% < load <125%) ±10%: report error and turn off the output after 5 minutes;
(125% < load < 150%) ± 10%: report error and turn off the output after 10 seconds;
Load >150% ±10%: report error and turn off the output after 5 seconds;

(102% < load <110%) ±10%: report error and turn off the output after 5 minutes;
(110% < load < 125%) ± 10%: report error and turn off the output after 10 seconds;
(Load >150% ±10%): report error and turn off the output after 5 seconds;

Peak power

6000VA

8000VA

10000VA

5000VA

6000VA

7000VA

Loaded motor capability

2HP

3HP

4HP

1HP

1HP

2HP

Output short circuit protection

Circuit breaker

Bypass breaker specifications

40A

Rated battery input voltage

48V (Minimum starting voltage 44V)

Battery voltage range

Undervoltage alarm/shutdown voltage/overvoltage alarm /overvoltage recovery... settable on LCD screen)

Power saving mode

Load ≤25W

Mains charging

Battery type

Lead acid or lithium battery

Maximum charge current

60A

30A

Charge current error

± 5Adc

Charge voltage range

40 –58Vdc

40 –60Vdc

Short circuit protection

Circuit breaker and blown fuse

Circuit breaker specifications

40A

Overcharge protection

Alarm and turn off charging after 1 minute

PV charging

Maximum PV open circuit voltage

145Vdc

PV operating voltage range

60-145Vdc

MPPT voltage range

60-115Vdc

Battery voltage range

40-60Vdc

Maximum output power

3200W

4200W

3200W

4200W

PV charging current range (can be set)

0-60A

0-80A

0-60A

0-80A

Charging short circuit protection

Blown fuse

Wiring protection

Reverse polarity protection

Certified specifications

Certification

CE(EN62040-1)

EMC certification level

EN62040-2, C2

Operating temperature range

-15°C to 55°C

Storage temperature range

-25°C ~ 60°C

Humidity range

5% to 95% (Conformal coating protection)

Noise

≤60dB

Heat dissipation

Forced air cooling, variable speed of fan

Communication interface

USB/RS485(Bluetooth/WiFi/GPRS)/Dry node control

Size (L*W*D)

430mm*338mm*126mm

Weight (kg)

10

 

 Basic system introduction

The figure below shows the system application scenario of this product. A complete system consists of the following parts:

 

  1. PV module: Convert light energy into DC power, and charge the battery through the all-in-one solar charge inverter, or directly invert into AC power to drive the load.
  2. Mains or generator: Connected at the AC input, to power the load while charging the battery. If the mains or generator is not connected, the system can also operate normally, and the load is powered by the battery and PV module.
  3. Battery: Provided to ensure normal power supply to the system loads when solar energy is insufficient and the Mains is not connected.
  4. Household load: Allow connection of various household and office loads, including refrigerators, lamps, TVs, fans and air conditioners.
  5. All-in-one solar charge inverter: The energy conversion unit of the whole system. Specific system wiring method depends on the actual application scenario.

 Temank 40A MPPT All-In-One Solar Charge Controller HF4830S60 With LCD Screen For power tools industrial equipment

 

 Appearance

 Temank 40A MPPT All-In-One Solar Charge Controller HF4830S60, LCD Screen For power tools

 

CAN communication port

PV1 port

USB communication port

AC input port

RS485 communication port

AC output port

Dry node port

ON/OFF rocker switch

Overload protector

Grounding screw hole

Cooling fan

Touch button

Battery port

Indicator

PV2 port

LCD screen

 

Recommended battery input wire diameter and switch selection

 

Models

Recommended battery wiring diameter

Rated battery discharge current

Maximum charge current

Recommended air switch or circuit breaker type

HF4830S60

20mm2/4AWG

85A

120A

2P—140A

HF4840S60

25mm2/3AWG

110A

120A

2P—160A

HF4850S80

30mm2/2AWG

125A

140A

2P—200A

HF4825U60

20mm2/4AWG

75A

90A

2P—120A

HF4830U60

20mm2/4AWG

85A

90A

2P—120A

HF4835U80

25mm2/3AWG

100A

140A

2P—160A

Recommended AC output wiring specifications and circuit breaker selection

 

Models

Recommended battery wiring diameter

Rated inverter AC output current

Maximum bypass output current

Recommended air switch or circuit breaker type

HF4830S60

10mm2/7AWG

13A

40A

2P—40A

HF4840S60

10mm2/7AWG

17.5A

40A

2P—40A

HF4850S80

10mm2/7AWG

22A

40A

2P—40A

HF4825U60

10mm2/7AWG

21A

40A

2P—40A

HF4830U60

10mm2/7AWG

25A

40A

2P—40A

HF4835U80

10mm2/7AWG

30A

40A

2P—40A

 

Note: The wiring diameter is for reference only. If the distance between the PV array and the all-in-one solar charge inverter or the distance between the all-in-one solar charge inverter and the battery is relatively long, using a thicker wire can reduce the voltage drop to improve system performance. Note: The above are only recommended wiring diameter and circuit breaker. Please select the appropriate wiring diameter and circuit breaker according to actual situations.

 LCD screen operating instructions

Operation and display panel

The operation and display panel is as shown below, including 1 LCD screen, 3 indicators and 4 operation buttons.

Temank, MPPT, All-In-One, Solar Charge Controller, HF4830S60 ,LCD Screen For industrial equipment

Operation buttons introduction

 

Function buttons

Description

SET

Enter/Exit Settings menu

UP

Previous choice

DOWN

Next choice

ENT

Confirm/Enter Options under the settings menu,

Indicators introduction

 

Indicators

Colors

Description

AC/INV

Yellow

Steady on: Mains output

Flash: Inverter output

CHARGE

Green

Flash: Battery charging

Steady on: Charging completed

FAULT

Red

Steady on: Fault state

LCD screen introduction

Temank 40A MPPT All-In-One Solar Charge Controller HF4830S60 With LCD Screen For power tools industrial equipment

Temank 40A MPPT All-In-One Solar Charge Controller HF4830S60 With LCD Screen For power tools industrial equipment

There is detail information about Temank 40A 110V/120V MPPT All-In-One Solar Charge Controller HF4835U80 With LCD Screen For refrigerators, lamps, TVs, fans
 as below:

Temank 40A 110V/120V MPPT All-In-One Solar Charge Controller HF4835U80 With LCD Screen For refrigerators, lamps, TVs, fans Manual Download