Temank EPever MPPT Dual Battery Solar Controller Regulator Feature
- Brand: Temank
- Product Model: DR3210N
- Technology: MPPT
- Maximum Power Point Tracking technology with ultra-fast tracking speed and the tracking efficiency is no less than 99.5% guaranteed
- Advanced MPPT control algorithm to minimize the MPPlost rate and lost time
- The wider range of the MPP operation voltage to improve the PV module utilization
- Auto control function of charging power & charging current limitation(BATT1)
- High quality and low failure rate components of ST, TI and Infineon to ensure the product life
- Digital circuit control of adaptive three-stage charging mode to enhance BATT1 life.
- BATT1 type can be set via LED/LCD.
- Product runs into the low-power mode when there is no manual operation for a long time, and charging conditions are not satisfied (PV<5V).
- 100% charging and discharging in operationenvironmental temperature range.
- LED and LCD dispiay units selectable.
- AES control signal for car refrigerator to avoid energy waste.
- Standard Modbus protocol, and RS485 (5V/200mA) communication port for the customer to expand the application area.
Technical specifications
Item |
DR1206N-DDS |
DR2210N-DDS |
DR3210N-DDS |
BATT1 rated voltage |
12/24VDC |
||
BATT2 rated voltage |
12/24VDC Auto |
||
Rated Charge Current |
10A |
20A |
30A |
Battery Input Voltage Range |
8.5~32V |
||
Max. PV Open Circuit Voltage |
60V(At min. operating environment temp.) |
100V(At min. operating environment temp.) |
|
MPP Voltage Range |
(Battery Voltage+2V)~36V |
(Battery Voltage+2V)~72V |
|
Rated Charge Power |
130W/12V |
260W/12V |
390W/12V |
Max. conversion efficiency |
97.40% |
97.50% |
98% |
Full load efficiency |
97% |
96% |
96% |
Self-consumption |
12mA/12V;8mA/24V |
26mA/12V;15mA/24V |
|
Temperature compensate coefficient |
-3mV/℃/2V(default) |
||
Grounding |
Common negative |
||
BATT2Full voltage |
13.8V/12V;27.6V/24V(default) |
||
BATT2 Charge return voltage |
13V/12V;26V/24V(default) |
||
AES signal port |
5VDC/Max.200mA(3.81-4P) |
||
RS485 com. port |
|||
Com. baud rate |
115200(default) |
||
LCD backlight time |
60S(default) |
||
Mechanical Parameters |
|||
Item |
DR1206N-DDS |
DR2210N-DDS |
DR3210N-DDS |
Dimension |
227.2×143×58.1mm |
243.7×158×63mm |
247.2×165×68.5mm |
Mounting dimension |
160×134mm |
180×149mm |
180×156mm |
Mounting hole size |
φ5mm |
||
Terminal |
12AWG/4mm 2(BATT1) |
6AWG/16mm2(BATT1) |
|
Recommended cable size |
12AWG/4mm²(BATT1) |
10AWG/6mm2(BATT1) |
8AWG/6mm2(BATT1) |
Weight |
0.8kg |
1.1kg |
1.4kg |
Environmental Parameters |
|||
Item |
DR1206/2210N-DDS |
DR3210N-DDS |
|
Working environment |
﹣30℃~+50℃(DDB) |
﹣30℃~+45℃(DDB) |
|
Storage temperature range |
-30℃~+80℃ |
||
Relative humidity |
≤95%, N.C |
||
Enclosure |
IP33 |
||
Pollution degree |
PD2 |
There is detail information about Temank EPever MPPT Dual Battery Solar Controller Regulator DR3210N as below:
Temank EPever MPPT Dual Battery Solar Controller Regulator DR3210N manual download