Temank EPever MPPT Solar Charge Controller Tracer2215BN 20A 12V 24V DC
Temank EPever MPPT Solar Charge Controller Tracer2215BN 20A 12V 24V DC
Temank EPever MPPT Solar Charge Controller Tracer2215BN 20A 12V 24V DC
Temank EPever MPPT Solar Charge Controller Tracer2215BN 20A 12V 24V DC

Temank EPever MPPT Solar Charge Controller Tracer2215BN 20A 12V 24V DC

Regular price
Sale price
Unit price

Temank EPever MPPT Solar Charge Controller Tracer2215B Feature

  • Brand: Temank
  • Technology: MPPT
  • Advanced Maximum Power Point Tracking (MPPT) technology, with efficiency no less than 99.5%.
  • High quality components, perfecting system performance, with maximum conversion efficiency of 98%.
  • Ultra-fast tracking speed and guaranteed tracking efficiency.
  • Accurately recognizing and tracking of multiple power points.
  • Reliable automatic limit function of maximum PV input power, ensuring no overload under any circumstance.
  • Wide MPP operating voltage range.
  • Die-cast aluminum design, ensuring excellent heat dissipation characteristic.
  • 12/24VDC automatically identifying system voltage or user-defined working voltage.
  • LED indicators showing system status, simple and clear.
  • Multiple load control modes: manual control, light ON/OFF, light On+Timer and time control.
  • Support 4 charging options: Sealed, Gel, Flooded and User.
  • Battery temperature compensation function.
  • Real-time energy statistics function.
  • With RS-485 communication bus interface and Modbus communication protocol, it is available to meet various communication requirements in different situations.
  • Available for PC monitoring and external display unit connecting like MT50 and so on, realizing real-time data checking and parameters setting.
  • Support software upgrade.

 Electrical Parameters

Item Tracer 1215BN Tracer 2215BN Tracer 3215BN Tracer 4215BN
Nominal system voltage 12/24VDC Auto
Rated charge current 10A 20A 30A 40A
Rated discharge current
10A 20A 30A 40A
Battery voltage range 8V~32V
Max. PV open circuit voltage 150V (at minimum operating environment temperature)
138V (at 25℃ environment temperature)
MPP voltage range Battery voltage+2V~108V
Max. PV input power 130W(12V)
Self-consumption ≤60mA(12V);≤30mA(24V)
Discharge circuit voltage drop ≤0.15V
Temperature compensate coefficient -3mV/ºC/2V(Default)
Communication RS485(RJ45 interface)
Grounding IP30

Environmental Parameters

Ambient temperature range* -35℃~+55℃
Storage temperature range -35℃~+80℃
Humidity range ≤95% (N.C.)
Enclosure IP30

* Please operate controller at permitted ambient temperature. If over permissible range, please derate capacity in service.

Mechanical Parameters

Mechanical Tracer2215BN
Dimension 216.6x142.6x56mm
Mounting dimension 130mm x 204mm
Mounting hole size Φ4.7
Power cable 8AWG(10mm2)
Weight 1.5kg



Temank, EPever, MPPT, Solar Charge Controller


  1. Connect components to the charge controller in the sequence as shown above and pay much attention to the ―+‖ and ―-‖. Please don‘t turn on the fuse during the installation. When disconnecting the system, the order will be reserved.
  2. After installation, power the controller and check the battery indicator on the controller, it will be green. If it‘s not green, please refer to chapter 4. Always connect the battery first, in order to allow the controller to recognize the system voltage.
  3. The battery fuse should be installed as close to the battery as possible. The suggested distance is within 150mm.
  4. The Tracer-BN series is a negative ground controller. Any negative connection of solar, load or battery can be earth grounded as required.

There is detail information about Temank MPPT Solar Charge Controller Tracer2215BN as below:

Temank EPever MPPT Solar Charge Controller Tracer 2215B download