Temank EPever Power Inverters IP2000-41 Feature
- Brand: Temank
- Product Model: IP2000-41
- Complete isolation-type inverter technology
- Adoption of advanced SPWM technology, pure sine wave output
- Dynamic current loop control technology to ensure inverter reliable operation
- Wide DC input voltage range
- Low output harmonic distortion (THD≤5%)
- Optional output voltage and frequency at 110/120VAC,50/60Hz
- High conversion efficiency up to 95%
- USB output 5VDC/1A*
- RS485 communication port*
- Extensive Electronic protection
NOTE: Only the model of the USB output port or RS485 port.
Temank EPever Power Inverters IP2000-41 Technical Parameters
|
Model |
IP2000-21 |
IP2000-41 |
|
Input Rated Voltage |
24VDC |
48VDC |
|
Input Voltage Range |
21.6～32VDC |
43.2～60VDC |
|
Input surge voltage |
＜40VDC |
＜80VDC |
|
No-load current |
＜0.6A |
＜0.4A |
|
Output Voltage |
110VAC(±5%) |
|
|
Output Continuous Power |
1600W |
|
|
Output Power 15 min. |
2000W |
|
|
Instantaneous impact power |
3200W |
|
|
Output way |
Single phase |
|
|
Output Wave |
Pure sine wave |
|
|
Output Frequency |
50/60Hz(±0.2%) |
|
|
Distortion THD |
THD≤5%(Resistive load) |
|
|
Max. Efficiency |
95% |
|
|
Max. USB Output |
5VDC/1A |
|
|
Binding post |
Φ10mm |
|
|
Overall dimension |
326.12×231.5×98.5mm |
|
|
Mounting dimension |
208×219.5mm |
|
|
Mounting hole size |
Φ5.5mm |
|
|
Net weight |
4.0kg |
|
Environmental Parameters
|
Working environment temperature |
-20℃～+45℃ |
|
Storage temperature range |
-35℃～+70℃ |
|
Humidity range |
≤93%（N.C.） |
|
Enclosure |
IP20 |
|
Altitude |
<5000m |
Wiring
(1)12/24/48Vsystem DC input
(2) 110/120V AC output
Operation Steps:
- Step 1: Turn off the switch of inverter
- Step 2: Connect the battery (‘+’ terminal with red line, ‘-’with black line). Do not connect them by contraries, or the power inverter will be damaged.
- Step 3: Connect the protective grounding to the ground
- Step 4: Connect the AC load to the AC outlet
- Step 5: Switch on the fuse or breaker. Switch the inverter to ON and then turn on the loads one by one. Check the operation state of both power inverter and loads. ‘Green’ of the Working indicator means the state is normal.
- Step 6: If there are different loads, it is suggested that turn on the load with large startup current first, such as television, then turn on the load such as lamp when the inverter works stably.
- Step 7: If the Fault indicator is ‘Red’ and the buzzer alarms or no output when you turn on devices, switch off the loads and power inverter immediately. Check the system by referring to the troubleshooting guide. Turn on the devices again according to the operation methods after the failure is removed.
Designations of models
|
Model |
Input Rated |
Output Voltage |
Output Power |
|
IP350-12 |
12VDC |
220/230VAC |
350W |
|
IP350-22 |
24VDC |
220/230VAC |
350W |
|
IP500-12 |
12VDC |
220/230VAC |
500W |
|
IP500-22 |
24VDC |
220/230VAC |
500W |
|
IP1000-12 |
12VDC |
220/230VAC |
1000W |
|
IP1000-22 |
24VDC |
220/230VAC |
1000W |
|
IP1500-12 |
12VDC |
220/230VAC |
1500W |
|
IP1500-22 |
24VDC |
220/230VAC |
1500W |
|
IP2000-22 |
24VDC |
220/230VAC |
2000W |
|
IP2000-42 |
48VDC |
220/230VAC |
2000W |
|
IP350-11 |
12VDC |
110/120VAC |
350W |
|
IP350-21 |
24VDC |
110/120VAC |
350W |
|
IP500-11 |
12VDC |
110/120VAC |
500W |
|
IP500-21 |
24VDC |
110/120VAC |
500W |
|
IP1000-11 |
12VDC |
110/120VAC |
1000W |
|
IP1000-21 |
24VDC |
110/120VAC |
1000W |
|
IP1500-11 |
12VDC |
110/120VAC |
1500W |
|
IP1500-21 |
24VDC |
110/120VAC |
1500W |
|
IP2000-21 |
24VDC |
110/120VAC |
2000W |
|
IP2000-41 |
48VDC |
110/120VAC |
2000W |
|
ª 220/230VAC output outlet: Universal, Australia/New Zealand, European, |
|||
There is detail information about Temank EPever Power Inverters IP2000-41 manual as below: