Temank PVSC-30A Solar Charge Controller Feature:
- Brand: Temank
- Product Model: PVSC-30A
- Automatic Identification System Voltage, 12V/24V auto recognition.
- Humanized LCD displaying and double button operation of man-machine interface.
- Completed technical data for setup and modify.
- The load control mode can be selected, the timer function can be reset for street light at night.
- Discharge capacity control
- Discharge Counter of Ampere Hour
- Working Storage Function: record the total run time of system, record timers of error during running time, record times of full charged battery.
- Reliable over voltage protection, short circuit protection, over load protection, overcharge protection, over-discharge protection.
- Accurate temperature compensation, correcting the charging and discharging voltage automatically, improving the battery lifetime.
- Roundly reverse connected protection.
- Solar Panels, Battery, Solar Charge Controller positive poles are all connected together, adopting negative MOSFET in series control circuit.
The Product Specification
|
Model |
30A | 50A | 70A |
|
System Voltage |
12V/24V |
|
Max. Input Voltage of solar panel |
55V |
|
Self-consumption |
<10mA |
|
Max. charge current |
30A 50A 70A |
|
Max. discharqe current |
30A 50A 70A |
|
LVD |
11.0V ADJ 9V・・・12V;x2/24V |
|
LVR |
12.6V ADJ 11V-13.5V;x2/24V |
|
Float Voltage |
13.8V ADJ 13V・・・15V;x2/24V |
|
Boost charging |
14.4V ;x2/24V Battery Voltage less than 12Vstart boost charging 2 hours |
|
Battery Over Voltage Protection |
16.5V;x2/24V |
|
Reverse Connection Protection |
yes |
|
Load Over Current Protection |
Yes, each two minutes restart once |
|
Temperature Compensation |
-24 mV/°C for 12Vsystem;x2/24V |
|
Working Temperature |
-20°C-+55°C |
|
Waterproof grade |
IP32 |
|
Size30A |
175.9mmx139mmx40.1mm |
|
Size50A |
209.3mmx191.7mmx52.9mm |
|
Size70A |
229.4mmx201mmx54.7mm |
|
USB |
5V2.1A |
|
DC output |
12V/24V |
|
Net weight |
0.38kg/0.75kg/1.16kg |
The Feature Of LCD Graphic Symbol
- The default night display of controller: When the solar panel input voltage have been detected by controller less than sensor identification point voltage, this graphic symbol will be light.
- The default daytime display of controller: When the solar panel input voltage have been detected by controller more than sensor identification point voltage, this graphic symbol will be light.
- The indicator of PV array parameter: When the solar panels data was displaying, this graphic symbol will be light. For example the voltage of solar panel.
- The indicator of battery parameter: When the battery parameter was displaying, this graphic symbol will be light. For example the voltage of battery, temperature of battery.
- The indicator of load parameter: When the load parameter was displaying, this graphic symbol will be light.
- System Voltage: When the LCD shows different system voltage, the controller will adjust the technical data automatically.
- Timer Setting Function.
- Switch Graphic Symbol.
- Unit Symbol Value
- Warning: When there is fault, this graphic symbol will be light.
- The indicator of Load status:Load on/Load off.
- The indicator of Output power: When the load terminal have output, this graphic symbol will be light.
- The indicator of capacity of battery: When the battery was in different capacity, the strip-type will show.
- The indicator of charge status: When the controller is charging, the symbol will be light, float charge will be flash, no charging no display.
Please download the manual about Temank PVSC-30A series as below: