Temank PWM 80A 12V 24V Solar Charge Controller S80 For PV System
Temank PWM 80A 12V 24V Solar Charge Controller S80 For PV System
Temank PWM 80A 12V 24V Solar Charge Controller S80 For PV System

Temank PWM 80A 12V 24V Solar Charge Controller S80 For PV System

Regular price
$53.99$53.99
Sale price
$47.99$47.99
Unit price
per 

  • Brand: Temank
  • Product Model: S80
  • Technology: PWM
  • LCD screen display
  • Battery reverse discharge protection
  • Easy operation interface
  • Battery reverse polarity protection
  • PWM charging mode
  • Battery under voltage protection
  • Parameter user can reset
  • Overload, short-circuit protection
  • A key to open and close the load
  • Automatic temperature compensation function
  • A key to restore the factory settings
  • Optional USB 5V charging (for 500mA)

 Temank PWM 80A 12V 24V Solar Charge Controller Specification

model Parameters

Solar30/60/80

model Parameters

Solar30

Solar60

Solar80

Rated working current

30A

60A

80A

Cable

≤7# AWG (10mm2)

(20mm2)

(25mm2)

Rated working voltage

12V/24V

Working temperature

-10℃~60℃

Solar panels voltage

≤48V

Storage temperature

-30℃~70℃

Float charging voltage(settable)

13.8V/27.6V

Humidity requirements

≤90%,

Low voltage protection(settable)

 

10.7V/21.4V

dimension

90

mm×188 mm×50mm

128 mm×188

mm×61mm

128

mm×188 mm×61mm

Low voltage recovery(settable)

 

12.5V/25.0V

Mounting hole spacing

60

mm×178 mm --Φ5

98mm×178 mm

--Φ5

98

mm×178 mm --Φ5

No-load loss

≤25mA

weight

≤360g

≤800g

≤1000g

Loop pressure drop

≤160mV

Temperature compensation

-4mV/Cell/℃

Charging mode

PWM mode

 

Temank PWM 80A 12V 24V Solar Charge Controller Solar80 For PV System Instructions

 Temank PWM 80A 12V 24V Solar Charge Controller Solar80 For PV System

 

  1. Ready Qi installation tools and materials, and cable. Please matching suitable cable
  2. Ensure that the current density <4A/mm2 this will help to reduce the line pressure drop.
    Recommended:
    30A current 10mm2
    60A current 20mm2
    80A current 25 mm2 cable.
    Check whether the installation site
    Comply with the relevant safety requirements, avoid damp, dusty, there is easyInflammable, explosive and corrosive gases place to install using the controller
  3. Install the controller fixed to the vertical plane, see Section V mounting aperture and hole spacing. In order to ensure a good controller cooling conditions, the controller on the bottom of each reserved 10cm space
  4. As shown on the right wiring sequence: load, battery, solarQ Battery plate is connected to the controller to be taken to ensure that the load, battery, The polarity of the solar cell panel and controller
  5. Before use: external temperature sensor probe into the left of the controller temperature probe interface probe placed in similar battery temperature. (Line extension must be built-in devices of the external temperature probe coextensive Otherwise, the controller will control parameters of the temperature compensation of the error
  6. Warning: In order to prevent accidents from occurring, install: non-professionals can not be engaged in loading and unloading operations

LCD operating interface description

 Temank PWM 80A 12V 24V Solar Charge Controller For PV System, Temank, PWM

 Temank PWM Solar Charge Controller PV System, 12V, 24V

Function keys

Parameter settings (≥ 5 seconds keystrokes, parameters are savedautomatically)Temank PWM Solar Charge Controller Solar80 For PV System, PV System

3Parameter settings (≥ 5 seconds keystrokes, parameters are saved automatically)

Temank PWM Solar Charge Controller For PV System, Temank, PWM

4Common fault with processing methods

 Temank PWM, Solar Charge Controller, PV System

 

  1. Under voltage protection and handling: screen display as shown on the right indicates the battery voltage is below the undervoltage protection voltage, the controller has entered undervoltage
  2. Retaining state, disconnect the load circuit. Using solar panels or charger to charge the battery when the accumulator
  3. After the battery voltage reaches the undervoltage recovery voltage, the controller will restore power to the load, into normal working condition

Please download the manual about the Temank PWM 80A 12V 24V Solar Charge Controller Solar80 For PV System as below:

Temank PWM 60A 12V 24V Solar Charge Controller Solar60 For PV System download