Temank PWM MPPT Solar Charge Controller M10 12A AWG10 Built-in LCD disply
Temank PWM MPPT Solar Charge Controller M10 12A AWG10 Built-in LCD disply
Temank PWM MPPT Solar Charge Controller M10 12A AWG10 Built-in LCD disply
Temank PWM MPPT Solar Charge Controller M10 12A AWG10 Built-in LCD disply

Temank PWM MPPT Solar Charge Controller M10 12A AWG10 Built-in LCD disply

Regular price
$30.00
Sale price
$24.21
Unit price
per 

  • Brand: Temank
  • Product Model: M10
  • Charge Model: PWM/MPPT
  • LCD screen display
  • Easy operation interface
  • MPPT+ PWM charging mode
  • Parameter user can reset
  • A key to open and close the load
  • A key to restore the factory settings
  • Battery reverse discharge protection
  • Battery reverse polarity protection
  • Battery under voltage protection
  • Overload, short-circuit protection
  • Automatic temperature compensation function
  • USB 5V charging (for 500mA) for mobile phone

Parameter table

Parameters / Model

MPPT10

MPPT20

MPPT30

MPPT40

Maximum power current

12A

20A

30A

40A

Installation  Line(mm2

4mm2

8mm2

10mm2

12mm2

Installation Line(AWG)

10(AWG)

8(AWG)

7(AWG)

6(AWG)

Weight

280g

300g

475g

480

Dimensions

143×89×46(mm)

187*97*61(mm)

System load loss

13mA

Loop Buck

100mV

 

Battery float voltage

13.8V(12V system)/27.6V(24V system)

Battery (under voltage) protection

10.6V(12V system)/21.2V(24V system)

Battery (under voltage) recovery voltage

12.6V(12V system)/25.2V(24V system)

Charge mode

MPPT+PWM MODE

Operating Temperature

-10℃~60℃

Storage Temperature

-30℃~70℃

Humidity requirements

≤90%, No condensation

Temperature compensation

-4mV/Cell/℃

Temperature Probe (built components)

NTC 100K  thermistats

Maximum open circuit voltage of the solar panel

18V-24V(12V system)36V-48V(24V system)

Solar panels maximum open circuit voltage (V)

48V

Installation Instructions

Note: Installing wires, first loosen the screw counterclockwise

 

  1. Ready Qi installation tools and materials, and cable. Please matching suitable cable
  2. ensure that the current density <4A/mm2 This will help reduce the line pressure drop.
    Check the installation site meets the relevant safety requirements, avoid damp, dusty, flammable, explosive and corrosive gases
  3. Install the controller fixed to the vertical plane, see Section V mounting aperture and hole spacing. In order to ensure a good controller cooling conditions, the controller on the bottom of each reserved 10cm space
  4. As shown on the right wiring sequence: load, battery, solar Battery plate is connected to the controller to be taken to ensure that the load, battery. The polarity of the solar cell panel and controller
  5. Before use: external temperature sensor probe into the left of the controller temperature probe interface probe placed in similar battery temperature. (Line extension must be built-in devices of the external temperature probe coextensive Otherwise, the controller will control parameters of the temperature compensation of the error
  6. Warning: In order to prevent accidents from occurring, install: non-professionals can not be engaged in loading and unloading operations

There is detail information about Temank PWM MPPT Solar Charge Controller M10 12A AWG10 At Factory Price as belew:

Temank PWM MPPT Solar Charge Controller M10 12A AWG10 Manual download